
BrochureDOWNLOAD
The PD sensor is used to detect partial discharge signals in UHF (Ultra High Frequency) band.
There are three types of sensors: External PD Sensor, Internal PD Sensor, and Noise Sensor.
- The External PD Sensor is installed on open-type insulating GIS spacer.
- The Internal PD Sensor is installed in mounted window of GIS enclosure.
- The Noise Sensor is a device installed externally at the substation GIS to detect various external electromagnetic signals such as corona, mobile phone, radar, switching surge.
Internal Sensor

Frequency Range | 300~2,000 MHz |
---|---|
Output Power (5pC) | Over -20 dBm |
Impedance | 50 Ω |
Sensitivity | Below 5pC |
Connector | N-Type |
Material | Aluminum, MC Nylon |
Install Position | GIS Enclosure |
External Sensor

Frequency Range | 300~2,000 MHz |
---|---|
Output Power (5pC) | Over -20 dBm |
Impedance | 50 Ω |
Sensitivity | Below 5pC |
Connector | N-Type |
Material | Aluminum, Epoxy |
Install Position | GIS Spacer |
Noise Sensor

Frequency Range | 300~2,000 MHz |
---|---|
Impedance | 50 Ω |
Connector | N-Type |
Material | PE |
Install Position | Near GIS |
Drain Value Sensor

Frequency Range | 300~2,000 MHz |
---|---|
Output Power (5pC) | Over -20 dBm |
Impedance | 50 Ω |
Sensitivity | Below 5pC |
Connector | N-Type |
Material | Steel, MC Nylon |
Install Position | Transformer Drain Valve |
Window Sensor

Frequency Range | 300~2,000 MHz |
---|---|
Output Power (5pC) | Over -20 dBm |
Impedance | 50 Ω |
Sensitivity | Below 5pC |
Connector | N-Type |
Material | Steel, MC Nylon |
Install Position | Transformer Enclosure |